Cellular Wireless Router F-R200

In Stock
  • Certification: CE, FCC
  • Outer shell: metal, IP30 protection level
  • System: watchdog design, complete mechanisms, stable operation
  • Abundant ports: RS232, RS485, RS422, Ethernet LAN&WAN, Wi-Fi
  • CPU: industrial-grade 32-bit processor & wireless module
  • Applied scenarios: M2M fields of the IoT industry, smart factories, etc.
  • dual module dual sim
  • OS Linux
Compare
Ask a Question

Ask a Question

    Description

    Four-Faith 4G Cellular Router F-R200

    • Four-Faith’s F-R200 is an IoT wireless communication router that plays the role of wireless data transmission through public networks in real IoT-applied solutions and other smart interactive scenarios.
    • Equipped with an industrial-grade 32-bit processor and wireless modules, and with the watchdog system, the F-R200 cellular router is able to keep its stable operation even in harsh industrial environments.
    • With abundant ports including RS232 and RS485, the F-R200 cellular router has the capacity to connect multiple devices simultaneously for wireless data transmission.
    • The F-R200 cellular router has been widely used in the M2M field of the IoT industry chain, such as smart grids, smart transportation, and environmental protection, etc.
    Specifications
    CELLULAR WAN • Supported Frequency Bands
    -- LTE: B1, B2, B3, B4, B5, B7, B8, B20, B28
    -- WCDMA: 2100(B1), 1900(B2), 850(B5)
    -- EV-DO/CDMA: 800(BC0)
    -- GSM/GPRS/EDGE: 850/900/1800/1900
    • Automatic SIM based network operator switching
    HOST INTERFACES • 10/100/1000 Base-T RJ45 Ethernet port
    • RS-232 or RS-485 Serial Console Port
    • 3 SMA antenna connectors (WIFI and Double-cellular)
    • Active GPS antenna support (option)
    • (6) pin 3.5mm terminal block
    INPUT/OUTPUT • (6) pin 3.5mm terminal block.
    • (2) DI, (1) DO, (1) Relay.
    • Input ON Voltage: 5 to 30 VDC.
    • Input OFF Voltage: 0 to 3 VDC.
    • Output < 50mA @ 30VDC.
    • Relay:1A 250VAC/30VDC
    LAN • DNS, DNS Proxy
    • DHCP Server
    • IP Passthrough (option)
    • VLAN
    • Host Interface Watchdog
    • PPPoE
    SERIAL • TCP/UDP PAD Mode
    • Modbus (ASCII, DTU, Variable)
    • PPP
    • Reverse Telnet
    EVENTS ENGINE (Option) • Custom event triggers and reports.
    • Configurable interface, no programming.
    • Event Types: Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature.
    • Report Types: TCP, UDP, SMS, SNMP Trap, HTTP, JSON.
    • Event Actions: Drive Relay Output.

     

    WIFI • IEEE802.11 ac, compatible IEEE 802.11 b/g/n.
    • AP and client mode.
    • Adjustable output power (Max: 26dBm)
    • Access point for up to 30 clients
    • Simultaneous access point/client mode
    • WEP, WPA-PSK, WPA2-PSK etc. Security
    NETWORK  AND ROUTING • Network Address Translation (NAT)
    • Port Forwarding
    • Host Port Routing
    • VRRP
    • Reliable Static Route
    • Dynamic DNS
    VPN • IPSec, GRE, and OPENVPN Client
    • Up to 10 concurrent tunnels
    • Split Tunnel
    • Dead Peer Detection (DPD)
    • Multiple Subnets
    • VPN Failover
    SECURITY • Remote Authentication
    • DMZ
    • Inbound and Outbound Port filtering
    • Inbound and Outbound Trusted IP
    • MAC Address Filtering.
    GPS (Option) • Antenna Interface: SMA Female, 50 ohms impedance
    • Tracking Sensitivity: better than -144 dBm
    • Horizontal position accuracy: 2.5 m
    • Time-To-First-Fix: 29 s
    • Protocol: NMEA-0183 V2.3
    OPERATION ENVIRONMENT • Operating Temperature: -35°C to +75°C / -31°F to +167°F
    • Storage Temperature: -40°C to 85°C / -40°F to 185°F
    • Humidity: 90% RH @ 60°C
    Scroll To Top
    Close
    Close