GL502MG

In Stock

LTE Waterproof Tracker with 10-Year Standby Time

  • Global LTE Cat M1/NB2 with 2G fallback using unique antenna solution
  • Up to 10-year standby time
  • Waterproof, compliant to IP68
  • Supports BLE 5.2
  • Supports WiFi positioning
  • Ideal for asset, trailer and container tracking applications
Compare
Ask a Question

Ask a Question

    Category:
    Description

    The GL502MG is our flagship product specifically designed for asset tracking, trailer tracking and container tracking. Its ruggedized IP68 waterproof design ensures the product remains reliable when installed in the harsh environments. The unique casing design allows rapid, flexible and low-cost installations meaning it can simply be placed with container, fixed with four spikes, or set using the optional magnetic holder kit. With 57000 mAh ultra-high capacity battery, the product features up to 10-year standby time meaning that fit and forget installation leaves users safe in the knowledge that the product will continue to monitor the asset over a long period. In addition, its user-replaceable battery brings lower maintenance cost. Its built-in BLE allows connectivity to diverse wireless accessories. It supports Wi-Fi scanning meaning more choice to locate the product and extend its applications in urban environments where there many wireless networks broadcasting and in places that are out of reach to GNSS.

    Specifications

    LTE Specifications

    Operating Band Cat M1:
    LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85
    Cat NB2:
    LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85
    Data Transmission eMTC (DL) 375 Kbps
    eMTC (UL) 375 Kbps
    NB2 (DL) 127 Kbps
    NB2 (UL) 158.5 Kbps
    NB1 (DL) 32 Kbps
    NB1 (UL) 70 Kbps

    EGPRS Specifications

    Frequency EGPRS 850 / 900 / 1800 / 1900 MHz
    Data Transmission GPRS: (DL) 107Kbps, (UL) 85.6Kbps
    EDGE: (DL) 296Kbps, (UL) 236.8Kbps

    GNSS Specifications

    GNSS Type u-blox All-in-One GNSS receiver
    Sensitivity Autonomous: -147 dBm
    Hot start: -156 dBm
    Reacquisition: -160 dBm
    Tracking: -162 dBm
    Position Accuracy (CEP) Autonomous: < 2.5m
    TTFF (Open Sky) Cold start: 27s average
    Warm start: 27s average
    Hot start: 1s average

    General Specifications

    Dimensions 250 × 58 × 61mm

    9.84’’(L) × 2.28’’(W) × 2.40’’(H)

    Weight 719g (25.36oz)
    Internal Battery 57000mAh, Lithium thionyl chloride battery
    Standby Time 1 report/ day : up to 10 years
    6 reports/ day : up to 6 Years
    5 minutes reporting: 3 months
    *The standby time is estimated under the condition of operating with LTE CAT M1/NB-IoT and the CSQ is greater than 15, working at a constant ambient temperature of 25°C and reporting once a day without any sensors.
    Waterproof IP68 compliant
    Operating Temperature -20℃ ~ +60℃
    BLE Support BLE 5.2 protocol
    Internal Temperature Sensor Built-in temperature sensor
    Buffer Messages Up to 10,000 buffer messages

    Interfaces

    Battery Switch Used for power on/off (Internal only)
    Cellular Antenna Internal only
    GNSS Antenna Internal only
    BLE Antenna Internal only
    WiFi Antenna Internal only
    SIM Access Internal only (3FF SIM)
    LED Indicators GNSS, Status (Internal only)
    USB Type-C Used for firmware upgrading and debug (Internal only)

    Air Interface Protocol

    Command Set @Track protocol command
    Transmit Protocol TCP, UDP, SMS
    Working Modes Power saving mode for long standby time
    Continuous mode for emergency tracking
    Scheduled Timing Report Report position and status at preset time intervals
    Geo-fences Support up to 20 internal geo-fence regions
    Low Power Alarm Alarm when internal battery is low
    Wakeup Report Report when the device wakes up
    Motion Detection Motion detection based on internal 3-axis accelerometer
    Reporting Frequency Adjustment Intelligent adjustment of reporting frequency
    Downloads

    Downloads and Datasheets

    Scroll To Top
    Close
    Close