GV56

In Stock

Micro Vehicle Tracker with BLE Supporting Two-way Voice

  • Compact size and cost effective
  • Multiple I/Os, including 1-wire interface as well as digital and analog I/O
  • Supports BLE temperature and humidity sensor, BLE key fob and BLE CAN reader
  • Ideal for fleet management, car leasing and stolen vehicle recovery applications
Compare
Ask a Question

Ask a Question

    Category:
    Description

    The GV56 is our most cost-effective product for use in light vehicle tracking applications including usage-based insurance, car rental, stolen vehicle recovery, logistics and more. The GV56 optimizes the available I/Os, allowing fuel cut-off, ignition detections, and a single analog sensor in addition to driver ID identification over 1-wire or BLE. Supported accessories include a range of BLE-based fuel and weight monitoring solutions offered from our partners.

    Specifications

    GSM Specifications

    Frequency Quad band
    GSM/GPRS 850 / 900 / 1800 / 1900 MHz
    Compliant to GSM phase 2/2+
    -Class 4 (2W @ 900/850 MHz)
    -Class 1 (1W @ 1800/1900 MHz)
    GPRS GPRS multi-slot class 10
    GPRS mobile station class B
    RMS Phase Error 5 deg
    Max RF Output Power GSM850/GSM900: 33.0±2 dBm
    DCS1800/PCS1900: 30.0±2 dBm
    Dynamic Input Range -15 ~ -108 dBm
    Receiver Sensitivity Class Ⅱ RBER 2% (-107 dBm)
    Stability of Frequency < 2.5 ppm

    GNSS Specifications

    GNSS Type MTK GNSS receiver
    Sensitivity Autonomous: -148 dBm
    Hot start: -163 dBm
    Tracking: -165 dBm
    Position Accuracy (CEP) Autonomous: < 2.5m
    TTFF (Open Sky) Cold start: 32s average
    Warm start: 30s average
    Hot start: 1s average

    General Specifications

    Dimensions 79.5 x 44.3 x 11.9mm
    3.13”(L) x 1.74”(W) x 0.47”(H)
    Weight 55g (1.94oz)
    Operating Voltage 8V to 32V DC
    Operating Temperature -30℃ ~ +80℃
    -40℃ ~ +80℃ for storage
    Backup Battery Li-Polymer, 170 mAh
    Standby Time Without reporting: 45 hours
    5 minutes’ reporting: 30 hours
    10 minutes’ reporting: 35 hours
    Bluetooth Support Bluetooth 3.0 (two-way voice communication) & BLE 4.0

    Interfaces

    Digital Inputs 1 positive trigger input for ignition detection or other positive trigger detection
    Digital Output 1 digital output, open drain, 150 mA max drive current
    Analog Input 1 analog input (0V-30V)
    1-wire Interface Support 1-wire temperature sensor and iButton driver ID
    GSM Antenna Internal only
    GNSS Antenna Internal only
    Bluetooth Antenna Internal only
    LED Indicators CELL, GNSS

    Air Interface Protocol

    Transmit Protocol TCP, UDP, SMS
    Scheduled Report Report position and status based on preset time intervals, distance, mileage or a combination of these settings
    Geo-fences Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions
    Power On Report Report when the device is powered on
    Special Alarm Special alarm based on digital inputs
    Remote Control OTA control of digital outputs
    Motion Detection Motion alarm based on internal 3-axis accelerometer
    Driving Behavior Monitoring Aggressive driving behavior detection, including harsh braking, acceleration, etc.
    Jamming Detection Alarm based on jamming detection
    Crash Detection Accident data collection for reconstruction and analysis
    Tow Alarm Alarm for tow event in ignition-off state
    Downloads

    Downloads and Datasheets

    Scroll To Top
    Close
    Close