GV58CEU

In Stock

Cost-effective Mini GNSS Tracker

  • LTE Cat 1 with 2G fallback using unique antenna solution
  • Compact for covert installation
  • Supports BLE 5.2
Compare
Ask a Question

Ask a Question

    Category:
    Description

    The GV58CEU is the most cost-effective LTE Cat 1 telematics device ideal for variety of fleet management applications range from general fleet tracking, car rental and leasing, stolen vehicle recovery, logistics and more. The GV58CEU optimizes the available I/Os, allowing fuel cut-off, ignition detections, and a single analog sensor in addition to driver identification over 1-wire or BLE. Supported accessories include a range of BLE-based temperature and humidity, fuel level as well as angle tilt monitoring solutions offered either from Queclink or selected partners.

    Specifications

    LTE Specifications

    Operating Band LTE-FDD: B1/B3/B7/B8/B20/B28
    Data Transmission LTE-FDD:(DL)10Mbps/(UL)5Mbps

    EGPRS Specifications

    Frequency 900/1800MHz
    Data Transmission EDGE:(DL)236.8Kbps/(UL)236.8Kbps
    GPRS:(DL)85.6Kbps/(UL)85.6Kbps

    GNSS Specifications

    GNSS Type u-blox All-in-one GNSS receiver
    Constellation Support GPS,Glonass,Galileo,Beidou
    Sensitivity Cold start: -148 dBm
    Hot start: -160 dBm
    Tracking: -167 dBm
    Position Accuracy (CEP) Autonomous: < 2.0m
    TTFF (Open Sky) Cold start: 24s average
    Hot start: 1s average

    General Specifications

    Dimensions 86.7(L) x 46.4(W) x 18.1(H)mm
    Weight 80g
    Backup Battery Li-Polymer, 190 mAh
    Operating Voltage 8V to 32V DC
    Operating Temperature -30℃ ~ +70℃
    -40℃ ~ +80℃ for storage
    BLE Support BLE 5.2 protocol

    Interfaces

    Digital Input 1 positive trigger input for ignition detection or other positive trigger detection
    2 negative trigger input (1 configurable input for Analog input / Digital Input)
    Digital Output 1 digital output, open drain, 150 mA max drive current
    Latched Digital Output 1 digital output with internal latch circuit, open drain, 150 mA max drive current (Reserved)
    Cellular Antenna Internal only
    GNSS Antenna Internal only
    BLE Antenna Internal only
    LED Indicators CEL, GNSS, Power
    Micro USB Interface Used for upgrade and debug
    1-wire Interface 1 (Support 1-wire temperature sensor and iButton driver ID)

    Air Interface Protocol

    Transmit Protocol TCP, UDP, SMS
    Scheduled Report Report position and status based on preset time intervals, distance, mileage or a combination of these settings
    Geo-fences Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions
    Low Power Alarm Alarm when backup battery is low
    Power On Report Report when the device is powered on
    Tow Alarm Alarm for tow event in ignition-off state
    Driving Behavior Monitoring Aggressive driving behavior detection, including harsh braking, acceleration, etc.
    Crash Detection Accident data collection for reconstruction and analysis
    Special Alarm Special alarm based on digital/analog inputs
    Remote Control OTA control of digital outputs
    Scroll To Top
    Close
    Close