The GV58CEU is the most cost-effective LTE Cat 1 telematics device ideal for variety of fleet management applications range from general fleet tracking, car rental and leasing, stolen vehicle recovery, logistics and more. The GV58CEU optimizes the available I/Os, allowing fuel cut-off, ignition detections, and a single analog sensor in addition to driver identification over 1-wire or BLE. Supported accessories include a range of BLE-based temperature and humidity, fuel level as well as angle tilt monitoring solutions offered either from Queclink or selected partners.
GV58CEU Cost-effective Mini GNSS Tracker
Previous product
GV57CEU Plus
0,00 €
Next product
GB100CG
0,00 €
0,00 €
In Stock
Cost-effective Mini GNSS Tracker
- LTE Cat 1 with 2G fallback using unique antenna solution
- Compact for covert installation
- Supports BLE 5.2
- Compact Size
- 1-wire Interface
- BLE 5.2
- OTA Control
- Scheduled Report
- Geo-fences
- Ignition Detection
- Emergency Alarm
- Motion Detection
- Driving Behavior Monitoring
- Accelerometer Self-calibration
- Crash Detection & Accident Reconstruction
- Tow Alarm
- Jamming Detection
- Driver Identification
Request a Quote for a Product
Request a Quote for a Product
Specifications
LTE Specifications
| Operating Band | LTE-FDD: B1/B3/B7/B8/B20/B28 |
| Data Transmission | LTE-FDD:(DL)10Mbps/(UL)5Mbps |
EGPRS Specifications
| Frequency | 900/1800MHz |
| Data Transmission | EDGE:(DL)236.8Kbps/(UL)236.8Kbps GPRS:(DL)85.6Kbps/(UL)85.6Kbps |
GNSS Specifications
| GNSS Type | u-blox All-in-one GNSS receiver |
| Constellation Support | GPS,Glonass,Galileo,Beidou |
| Sensitivity | Cold start: -148 dBm Hot start: -160 dBm Tracking: -167 dBm |
| Position Accuracy (CEP) | Autonomous: < 2.0m |
| TTFF (Open Sky) | Cold start: 24s average Hot start: 1s average |
General Specifications
| Dimensions | 86.7(L) x 46.4(W) x 18.1(H)mm |
| Weight | 80g |
| Backup Battery | Li-Polymer, 190 mAh |
| Operating Voltage | 8V to 32V DC |
| Operating Temperature | -30℃ ~ +70℃ -40℃ ~ +80℃ for storage |
| BLE | Support BLE 5.2 protocol |
Interfaces
| Digital Input | 1 positive trigger input for ignition detection or other positive trigger detection 2 negative trigger input (1 configurable input for Analog input / Digital Input) |
| Digital Output | 1 digital output, open drain, 150 mA max drive current |
| Latched Digital Output | 1 digital output with internal latch circuit, open drain, 150 mA max drive current (Reserved) |
| Cellular Antenna | Internal only |
| GNSS Antenna | Internal only |
| BLE Antenna | Internal only |
| LED Indicators | CEL, GNSS, Power |
| Micro USB Interface | Used for upgrade and debug |
| 1-wire Interface | 1 (Support 1-wire temperature sensor and iButton driver ID) |
Air Interface Protocol
| Transmit Protocol | TCP, UDP, SMS |
| Scheduled Report | Report position and status based on preset time intervals, distance, mileage or a combination of these settings |
| Geo-fences | Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions |
| Low Power Alarm | Alarm when backup battery is low |
| Power On Report | Report when the device is powered on |
| Tow Alarm | Alarm for tow event in ignition-off state |
| Driving Behavior Monitoring | Aggressive driving behavior detection, including harsh braking, acceleration, etc. |
| Crash Detection | Accident data collection for reconstruction and analysis |
| Special Alarm | Special alarm based on digital/analog inputs |
| Remote Control | OTA control of digital outputs |
Downloads
Downloads and Datasheets
Related products
5G Dongle
LTE Ruggedized Waterproof Solar Powered Asset Tracker
LTE Cat 1/2G compact GNSS tracker for a wide range of vehicle tracking applications
LTE Advanced Real-Time Asset Tracker
BLE internal tire pressure monitoring sensor
4G Industrial Router
BLE external tire pressure monitoring sensor
5G WiFi Router with SIM Card Slot
5G Industrial Cellular Router
Lite Industrial Cellular Router Lite Series
Industrial WiFi Router
Industrial Cellular Router Mini Series