GV59CEU

In Stock

The GV59CEU is an LTE Cat 1bis vehicle tracker with 2G fallback, built for fleet monitoring.

Features

  • Real-time vehicle position tracking
  • Driving behavior monitoring
  • Crash detection and reconstruction
  • Geo-fence alarm reporting
  • Tow and jamming detection
  • Remote OTA device control

Hardware

  • 9~90V DC operating voltage
  • -30°C to +70°C operating range
  • 86.7 × 46.4 × 18.1mm form factor
  • 200mAh Li-Polymer backup battery
  • BLE 5.4 built-in

Applications

Fleet management, automobile finance, stolen vehicle recovery, car leasing, logistics management.

Request a Quote for a Product

Request a Quote for a Product

    Description

    GV59CEU Description

    Overview

    The GV59CEU is a compact vehicle tracker built for everyday fleet and asset work. Its small body makes covert installation easy in cars, vans, and light vehicles.

    Connectivity

    It runs on LTE Cat 1bis with 2G fallback, so it keeps reporting even where newer networks are patchy. Data goes out over TCP, UDP, or SMS, on a schedule you set by time, distance, or mileage.

    Tracking

    The tracker fixes position using GPS, GLONASS, Galileo, and BeiDou together. That mix gives reliable location data across most driving conditions.

    Monitoring

    A built-in accelerometer handles motion, harsh driving, and crash detection. Tow and jamming alarms flag tampering, and geo-fences report when a vehicle leaves a set zone.

    Power

    It accepts a wide 9 to 90V input, so it fits everything from cars to larger commercial vehicles. A 200 mAh backup battery keeps it reporting through short power cuts.

    Accessories

    BLE 5.4 lets it act as a gateway for beacons and sensors, while the RS485 port and 1-wire interface connect external devices like driver ID readers.

    Industry Applications

    GV59CEU Industrial Applications

    Fleet

    Fleet operators track vehicles in real time and watch driving behaviour. Harsh braking and acceleration alerts help managers reduce risk and cut vehicle wear over time.

    Finance

    Automobile finance companies monitor financed vehicles remotely. Remote OTA control lets them manage the device without physical access, which keeps operational costs down.

    Recovery

    For stolen vehicle recovery, the tow alarm triggers the moment a vehicle is moved with the ignition off. Jamming detection adds another layer – it alerts operators when a signal blocker is active near the device.

    Leasing

    Car leasing firms keep tabs on where assets are and how they are driven. Geo-fences report movement outside agreed areas so contracts stay protected.

    Logistics

    Logistics teams follow light vehicles across delivery routes with scheduled reports. The wide voltage range means the GV59CEU fits a broad range of commercial vehicle types.

    Specifications

    General

    Dimensions 86.7 (L) × 46.4 (W) × 18.1 (H) mm
    Weight 58.2 g
    Backup Battery Li-Polymer, 200 mAh
    Operating Voltage 9 ~ 90V DC
    Operating Temperature −30 °C ~ +70 °C (operating)
    −40 °C ~ +80 °C (storage)
    Buffer Messages Up to 20,000 buffer messages
    BLE BLE 5.4 protocol
    Region EMEA, India
    Certification CE, RoHS

    LTE

    Operating Band LTE-FDD: B1 / B3 / B7 / B8 / B20 / B28
    Data Transmission LTE-FDD: 10 Mbps DL / 5 Mbps UL

    2G

    Frequency EGPRS: 900 / 1800 MHz
    Data Transmission EDGE: 236.8 Kbps DL / 236.8 Kbps UL
    GPRS: 85.6 Kbps DL / 85.6 Kbps UL

    GNSS

    GNSS Type All-in-one receiver
    Constellation Support GPS, BeiDou, Galileo, GLONASS
    Sensitivity Cold start: −148 dBm
    Hot start: −159 dBm
    Tracking: −165 dBm
    Position Accuracy (CEP) Autonomous: <2.0 m
    TTFF (Open Sky) Cold start: 28s average
    Hot start: 1s average

    Interfaces

    Digital Input 1× positive trigger input for ignition detection
    Configurable Input 1× configurable input (0V ~ 30V) or negative input
    Analog Input 1× analog input (0V ~ 16V)
    Latched Digital Output 1× digital output, open drain, 2A max drive current, internal latch circuit
    Serial Port 1× RS485 serial port for external devices
    One Wire Interface VDD, DATA for 1-Wire
    Cellular Antenna Internal only
    GNSS Antenna Internal only
    BLE Antenna Internal only
    LED Indicators CEL, GNSS, PWR
    Micro USB Interface Used for configuration, upgrade and debugging

    Connectivity (BLE)

    Model BLE
    Type 2.4 GHz
    Remark BLE 5.4, works as a BLE gateway to connect accessories: beacons, temperature sensors, door sensors, etc.

    Features

    Transmit Protocol TCP, UDP, SMS
    Scheduled Report Report position and status based on preset time intervals, distance, mileage, or a combination of these settings
    Geo-fences Geo-fence alarm and parking alarm; up to 20 internal geo-fence regions
    Speed Alarm Flexible speed monitoring for unusual speed alarm
    Low Power Alarm Alarm when backup battery is low
    Power On Report Report when the device is powered on
    SOS Alarm Alarm message triggered by panic button in emergency situation
    Tow Alarm Alarm for tow event in ignition-off state
    Jamming Detection Alarm based on jamming detection
    Virtual Ignition Detection Based on voltage and accelerometer
    Driving Behavior Monitoring Aggressive driving behavior detection: harsh braking, acceleration, etc.
    Crash Detection Accident data collection for reconstruction and analysis
    Special Alarm Special alarm based on digital/analog inputs
    Motion Detection Motion alarm based on internal 3-axis accelerometer
    Remote Control OTA control of digital outputs
    Order Codes

    Order Codes

    SKU: GV59CEU

    Order by referencing this SKU – contact info@easynt.com

    Downloads

    Downloads and Datasheets

    Scroll To Top
    Close
    Close