WRL300

In Stock

BLE Relay

Queclink WRL300 BLE access relay-control sensor enables 8–32V remote switching with IP64 durability for vehicle, motorcycle and building use.

Features

  • Controls external signals
  • Supports remote relay control
  • Works with BLE trackers
  • Enables access control
  • Allows wireless relay triggering

Hardware

  • BLE 5.1
  • IP64 protection
  • 8–32V DC operating voltage
  • 49 × 27 × 16 mm size
  • Up to 80 m range
  • -40°C to +85°C operation

Applications

Vehicle access control, motorcycle access control, building access control, wireless relay control.

Electrical Ratings

  • Standby current: <1.5 mA @12V, <1 mA @24V
  • Trigger current: 19 mA @12V, 10.6 mA @24V
  • Maximum load current: 6A @250VAC / 6A @30VDC
  • Max switch voltage: 400VAC / 125VDC
Request a Quote for a Product

Request a Quote for a Product

    Description

    WRL300 Description

    Core Purpose

    The WRL300 is a BLE 5.1 relay made to control external signals through a compatible Queclink tracker with a BLE interface. In simple terms, it acts as a small wireless switching accessory that lets the tracker trigger relay-based actions without a direct wired control link.

    It is positioned for access control use, especially in vehicles, motorcycles, and buildings. That makes it suitable for cases where a secure open or close action needs to be triggered remotely through the tracker system.

    Connectivity and Communication

    Its main communication method is BLE 5.1, which gives it a short-range wireless link to the host tracker. This allows the relay to be placed where it is needed while still being controlled through the tracker’s BLE interface.

    The datasheet also states a transmission range of up to 80 meters in open field conditions. In practice, this supports flexible installation for local wireless control where some distance is needed between the tracker and the relay point.

    Power and Environmental Suitability

    The WRL300 supports an 8–32V DC operating range, which makes it suitable for different low-voltage power environments commonly found in vehicles and related access systems. This wide input range helps it fit into varied installation setups without requiring a narrow power condition.

    For physical use, it has an IP64 rating and operates from -40°C to +85°C. That means it is designed to handle dust exposure, water splashes, and demanding temperature conditions better than a basic indoor-only accessory.

    Expansion and I/O Support

    This product is centered on relay-based switching of external signals rather than broad I/O expansion. Its role is focused and practical: receive a BLE control command from the tracker, then switch the connected external circuit.

    The electrical ratings show that it can handle up to 6A switching current, with maximum switch voltage up to 400VAC or 125VDC. These figures define the kind of external loads it is intended to control and help installers match it to the right application.

    Industry Applications

    WRL300 Industrial Applications

    Vehicle Access Control

    In vehicle installations, the WRL300 can be used as a wireless relay for access-related control through a compatible Queclink tracker. Its BLE connection and wide 8–32V DC input make it practical for automotive power environments and local remote switching.

    Motorcycle Access Control

    For motorcycles, the device’s compact 49 × 27 × 16 mm size is especially useful where installation space is limited. BLE-based control also helps support discreet relay placement for access or switching tasks.

    Building Access Control

    In building access setups, the WRL300 can act as a small relay point for controlled signal switching. Its IP64 protection and remote control role make it useful in places where the relay may need light environmental protection and dependable wireless control from the tracker side.

    Wireless Relay Control Systems

    The product also fits general relay-control applications where an external signal needs to be switched wirelessly through a BLE-enabled Queclink tracker. The up to 80 m open-field range gives added flexibility for local deployment across different control points.

    Specifications

    WRL300 Specifications

    Parameters

    Waterproof IP64
    Dimensions 49mm27mm16mm
    Weight 22g ± 1g
    Operating Voltage 8 ~ 32V DC
    Standby Current < 1.5mA @12V; < 1mA @24V
    Trigger Current 19mA@12V / 10.6mA@24V
    Maximum Load Current 6A@250VAC / 6A@30VDC
    The Max Switch Voltage 400VAC/125VDC
    The Max Switch Current 6A
    The Max Switch Power 1500VA/180W
    Operating temperature -40 ~ +85 ℃
    Transmission Range Up to 80m (Open Field)
    Order Codes

    Order Codes

    SKU: WRL300

    Order by referencing this SKU — contact info@easynt.com

    Downloads

    Downloads and Datasheets

    Scroll To Top
    Close
    Close