Gigabit ports and SFP
Four 1 Gbps RJ45 ports for devices, one dedicated gigabit RJ45 uplink and one gigabit SFP slot.
WS100 Queclink Unmanaged Gigabit Switch
5-port gigabit switch with SFP and DIN-rail clip
Order codeWS100 In stockOfficial distributor
The WS100 is an unmanaged industrial Ethernet switch with four gigabit RJ45 ports, one gigabit uplink and one SFP. Redundant 12–55 V DC feeds a 120 × 87 × 30 mm steel DIN-rail case.
- Ports5× RJ45 · 1× SFP
- Speed10/100/1000 Mbps
- Power12–55 V DC · redundant
- MountDIN-rail · wall · desktop
- Switching12 Gbps · 2K MAC
- Operating–40 °C to +75 °C
- In stockVilnius warehouse · EU
- In stockLondon warehouse · UK
Dispatch and lead time are confirmed in the quote.
- Official distributor
- 17+ years in IoT
- Installation support
Manufacturer warranty24 months
Overview
WS100 overview
Overview
The WS100 industrial Ethernet switch features four 1 Gbps RJ45 ports for device connectivity, plus a dedicated gigabit uplink port and a gigabit SFP slot for long-distance backhaul. The DIP switches instantly enable or disable port isolation mode and extended-range mode – no software configuration required. The compact metal enclosure mounts directly onto standard 35 mm DIN-rails. It is powered by a redundant 12–55 V DC input via terminal blocks (V1/V2), featuring hot-swap protection and plug-and-play compatibility with industrial power buses.
Key features
Redundant DC input
Redundant 12–55 V DC on V1/V2, with hot-swap protection. The terminal block and the DC jack must not be powered at once.
Port isolation DIP
VLAN mode isolates ports 1–4 so they communicate only with uplink ports 5–6. No software configuration.
Extend mode 250 m
Extend mode drops ports 1–4 to 10 Mbps for up to 250 m; off, they auto-negotiate 10/100/1000 Mbps to 100 m.
DIN-rail steel case
Steel housing, 120 × 87 × 30 mm, with a built-in 35 mm DIN-rail clip, plus wall and desktop mounting.
Industrial temperature
Operating temperature –40 °C to +75 °C, according to the datasheet.
Technical data
WS100 specifications
| General | |
|---|---|
| Casing | Steel |
| Dimensions | 120 × 87 × 30 mm |
| Weight | 441 g |
| Mainboard power consumption | 4.96 W typical |
| Mounting | Desktop, wall, DIN-rail |
| Operating voltage | DC 12–55 V |
| Operating temperature | –40 °C to +75 °C |
| Operating humidity | 10% to 90% non-condensing |
| Certification | CE, FCC, RoHS |
| Switch | |
| Bandwidth | 12 Gbps |
| Packet forwarding rate | 8.928 Mpps |
| Packet buffer | 1 Mbit |
| MAC address table | 2K |
| Jumbo frame | Supported |
| Forward mode | Store and forward |
| Interfaces | |
| Ethernet | 5 × RJ45, 10/100/1000 Mbps |
| Fibre | 1 × SFP |
| LEDs | 1 × power, 5 × RJ45, 1 × SFP |
| DIP switch | V/D/E mode |
| Power connection | 4-pin terminal, redundant V1 and V2; 1 × DC 2.1 jack. Terminal block and DC jack must not be powered simultaneously |
| Other | 1 × grounding screw |
| IEEE 802.3 | 802.3, 802.3u, 802.3ab, 802.3z, 802.3x |
| DIP function | |
| VLAN mode (V) | Enabled: ports 1–4 isolated, communicate only with uplink ports 5–6. Disabled: one broadcast domain |
| Default mode (D) | Non-functional |
| Extend mode (E) | Enabled: ports 1–4 at 10 Mbps up to 250 m. Disabled: 10/100/1000 Mbps auto-negotiation up to 100 m |
No specification rows match the filter.
Compliance
WS100 certifications
Approvals listed on the Queclink datasheet.
- CECERegulatory
- FCCFCCRegulatory
- RoHSRoHSRegulatory
Applications
WS100 applications
Industrial automation networks
Four gigabit access ports, one gigabit RJ45 uplink and one SFP slot in a steel DIN-rail case, with redundant 12–55 V DC.
Smart transportation systems
DIP extend mode runs ports 1–4 at 10 Mbps for up to 250 m when a longer copper run is needed.
Smart building
VLAN mode isolates ports 1–4 from each other so they communicate only with the uplink ports, with no software to configure.
Documentation
WS100 downloads
Questions
WS100 questions and answers
How many ports does the WS100 have?
Five 10/100/1000 Mbps RJ45 ports and one SFP port, according to the datasheet. Four RJ45 ports are for devices, one is the uplink.
What voltage does the WS100 need?
DC 12–55 V, redundant V1/V2. The terminal block and the DC jack must not be powered at the same time.
Is the WS100 a managed switch?
No. DIP switches set port isolation and extend mode. No software configuration is required, according to the datasheet.
Can the WS100 mount on DIN-rail?
Yes. It has a built-in 35 mm DIN-rail clip, and also lists desktop and wall mounting.
Does the WS100 include PoE?
No. PoE is not listed on the WS100 datasheet.
Request a quote
WS100 price and lead time
Tell us the quantity and the delivery country. We reply within one working day with the price, stock at the nearest warehouse and the dispatch date.
European headquarters+370 655 51654info@easynt.com
United Kingdom branch+44 7425 726932uk@easynt.com
- Company code306755852
- VAT numberLT100017217417
- Official distributor
- 17+ years in IoT
- Installation support
Manufacturer warranty24 months
Related
WS100 alternatives in the catalogue
QueclinkWS101
Unmanaged gigabit PoE switch, 150 W, DIN-rail
SFPEthernetPoE
Four-FaithFNS100-05-AGB-S
Unmanaged 5*Gigabit Ports
EthernetPoEIP40
Wi-TekWI-SG105(V3)
Gigabit Ethernet Switch
Ethernet
Wi-TekWI-SG116D(V2)
Gigabit Ethernet Switch
SFPEthernet