Long-range Wi-Fi HaLow
Long-range Wi-Fi HaLow connectivity.

Wi-Fi HaLow Gateway
The HL31 is a Wi-Fi HaLow gateway built to fill the gap between LoRaWAN and standard Wi-Fi. It runs as a Wi-Fi HaLow access point on the IEEE 802.11ah standard over the existing IP stack.
Dispatch and lead time are confirmed in the quote.
Manufacturer warranty24 months
Overview
The HL31 is a Wi-Fi HaLow gateway built to fill the gap between LoRaWAN and standard Wi-Fi. It moves larger data volumes, including images, while keeping power draw low, which opens up new indoor IoT use cases.
It runs as a Wi-Fi HaLow access point on the IEEE 802.11ah standard over the existing IP stack. Sensors and cameras join the network directly, so there is no mesh to plan or maintain.
The lower sub-GHz frequencies give better penetration than 2.4 GHz Wi-Fi, with a line-of-sight range of up to 1 km. One gateway supports as many as 200 connected nodes.
Data reaches the cloud over Ethernet or optional 4G, with automatic WAN failover. VPN tunnels such as IPsec, OpenVPN, L2TP, PPTP, and DMVPN keep that traffic private.
A quad-core ARM Cortex-A35 processor handles steady throughput even in busy indoor settings. The compact metal-free housing suits offices, plant floors, and similar spaces.
The small round body mounts on a desktop, wall, or ceiling. Wi-Fi configuration and a Type-C console make initial setup quick.
Long-range Wi-Fi HaLow connectivity.
Image and large-data transmission.
Up to 200 node connections.
Ethernet and 4G backhaul.
Multiple VPN tunnel support.
Built-in Wi-Fi HaLow access point.
Quad-core ARM Cortex-A35 CPU.
256 MB DDR3, 4 GB eMMC.
Technical data
| Specifications | |
|---|---|
| CPU | Quad-core 1.3 GHz, 64-bit ARM Cortex-A35 |
| Memory | 256 MB DDR3 |
| Flash | 4 GB eMMC |
| Specifications | |
| Standard | IEEE 802.11ah (1 × 1) |
| Antenna | 1 × external antenna |
| Channel Bandwidth | 1 / 2 / 4 / 8 MHz |
| Frequency | 850-950 MHz (AU, EU, IN, KR, NZ, SG, US) |
| Data Rate | Up to 32 Mbps |
| Sensitivity | −77.5 ~ −109 dBm |
| Tx Power | 21 dBm max |
| Mode | AP mode |
| Security | WPA3-SAE |
| Specifications | |
| Network | 4G LTE (CAT 4) / WCDMA / GSM |
| Antenna | 1 × external antenna |
| SIM Slot | 1 (Micro SIM-3FF) |
| Specifications | |
| Port | 1 × RJ45 WAN port |
| Physical Layer | 10/100 Base-T (IEEE 802.3) |
| Data Rate | 10/100 Mbps (auto-sensing) |
| Interface | Auto MDI/MDIX |
| Mode | Full or half duplex (auto-sensing) |
| Ethernet Isolation | 1.5 kV RMS |
| Specifications | |
| Standards | IEEE 802.11b/g/n, 2.4 GHz |
| Mode | AP mode (device configuration only) |
| Security | WPA-PSK/WPA2-PSK authentication, WEP/TKIP/AES encryption |
| Tx Power | 802.11b: 18 dBm ±2.0 dBm (11 Mbps) 802.11g: 15 dBm ±2.0 dBm (6-54 Mbps) 802.11n @ 2.4 GHz: 13-14 dBm ±2.0 dBm (HT20/HT40) |
| Specifications | |
| LED Indicators | 1 × SYSTEM, 1 × LTE |
| Button | 1 × reset button |
| USB | 1 × USB 2.0 (Type-C) for power supply and console |
| Built-in | Watchdog, timer |
| Specifications | |
| Network Protocols | PPPoE, SNMP v1/v2c/v3, TCP, UDP, DHCP, DDNS, HTTP, HTTPS, DNS, ARP, SNTP, Telnet, SSH, etc. |
| Firewalls | Access control, DMZ, port mapping (DNAT), MAC binding, filtering (IP & domain) |
| VPN Tunnel | OpenVPN / IPsec / PPTP / L2TP / GRE / DMVPN |
| DDNS | Supported >16 service providers; others can be configured manually |
| Multilevel Authority | Multiple levels of user authority |
| Reliability | WAN failover |
| Diagnostics Tools | Ping, Traceroute, Tcpdump, QXDM, Log Server |
| Configuration | Web, CLI (SSH/Telnet), on-demand dial up, SNMP v1/v2c/v3 |
| Event Alarm | Network up/down, VPN up/down, etc. |
| Specifications | |
| Power Input | 5V/2A by Type-C port 2.5-12V DC by DC cable 802.3af standard PoE input by PoE splitter |
| Power Consumption | Typical 3.9 W, maximum 5.2 W |
| Specifications | |
| Ingress Protection | IP30 |
| Housing & Colour | PC + ABS, black |
| Weight | 145 g (non-cellular), 163.4 g (cellular) |
| Dimensions | Φ 115 × 21 mm (antenna excluded) |
| Installation | Desktop, wall or ceiling mounting |
| Specifications | |
| Operating Temperature | −20 °C to +50 °C |
| Storage Temperature | −40 °C to +85 °C |
| Relative Humidity | 0% to 95% (non-condensing) at 25 °C |
| Specifications | |
| Regulatory | CE, FCC |
No specification rows match the filter.
Applications
In smart buildings the HL31 connects sensors and devices across floors without new cabling. Wi-Fi HaLow range covers large indoor areas from a single gateway.
On industrial sites it links equipment and monitoring points over a wide indoor footprint. The quad-core processor keeps data flowing in busy environments.
Paired with a Wi-Fi HaLow camera, the HL31 carries image data on low power. This makes lightweight visual monitoring practical where wiring is hard.
The gateway works with standard Wi-Fi HaLow sensors for distributed data collection. Up to 200 nodes report through one access point.
Questions
–20 … +50 °C, according to the specification.
IP30, according to the specification.
5V/2A by Type-C port 2.5-12V DC by DC cable 802.3af standard PoE input by PoE splitter, according to the specification.
Long-range Wi-Fi HaLow connectivity, according to the manufacturer description.
Request a quote
Tell us the quantity and the delivery country. We reply within one working day with the price, stock at the nearest warehouse and the dispatch date.
Manufacturer warranty24 months
Europe & United Kingdom
Product advice, availability and project enquiries.
All contact details