Palm-sized metal IP30 router
Palm-sized metal IP30 router for embedded scenes.

Mini Industrial Cellular Router
The UR41 is a compact LTE Cat 4 industrial cellular router built for low-cost, high-efficiency IoT connectivity in space-constrained and power-limited deployments. −40 °C to +60 °C.
Dispatch and lead time are confirmed in the quote.
Manufacturer warranty24 months
Overview
The UR41 is a compact LTE Cat 4 industrial cellular router built for low-cost, high-efficiency IoT connectivity in space-constrained and power-limited deployments. Its palm-sized metal enclosure delivers secure 4G backhaul with rich serial and I/O for field devices.
Global LTE Cat 4 with WCDMA and GSM fallback keeps remote equipment online where wired links are impractical. A single RJ45 LAN port, Nano SIM slot and internal cellular antenna suit embedded cabinets, kiosks and outdoor enclosures.
Advanced power management targets battery and solar applications: standby consumption can drop to 6.3 mA at 12 V, idle mode around 78 mA, and typical data-link draw about 226 mA. Wake-up is supported from timers, DI, cellular, Ethernet or serial events.
Integrated GPS, GLONASS, BeiDou, Galileo and QZSS enable real-time asset tracking and network time synchronisation when used with a compatible GNSS antenna.
DLMS client support connects modern power metres to management systems for substation automation, smart metering and grid monitoring. Software-switchable RS232/RS485, dry-contact DI and wet-contact DO integrate PLCs, sensors and controllers.
Hardware watchdog, SPI firewall, AAA (RADIUS, TACACS+, LDAP) and VPN options (OpenVPN, IPsec, GRE, L2TP, PPTP, DMVPN, WireGuard, ZeroTier) protect field connectivity. Configure via web, CLI, SMS, SNMP, TR069, DeviceHub or MilesightVPN.
Palm-sized metal IP30 router for embedded scenes.
LTE Cat 4 / WCDMA / GSM with global band options.
Built-in GPS / GLONASS / BeiDou / Galileo / QZSS.
Standby down to 6.3 mA; idle ~78 mA at 12 V.
DLMS client for smart metre integration.
RS232 or RS485, 1 × DI + 1 × DO, USB Type-C.
OpenVPN, IPsec, WireGuard, DMVPN and firewall.
DeviceHub, MilesightVPN and TR069 management.
Technical data
| Hardware System | |
|---|---|
| CPU | ARM Cortex-A7, 528 MHz |
| Memory | 128 MB DDR3 RAM and 128 MB Flash |
| Cellular Interface | |
| Network | 4G LTE (Cat 4) / WCDMA / GSM |
| Antenna Connector | 1 × 50 Ω SMA (centre pin: SMA female) |
| SIM Slot | 1 × Nano SIM (4FF) |
| Tx Power | LTE Class 3 (23 dBm ± 2 dB) |
| Ethernet Interface | |
| Ports | 1 × RJ45 10/100 Mbps LAN |
| Mode | Full or half duplex (auto-sensing) |
| Isolation | 1.5 kV RMS |
| GNSS | |
| Antenna Connector | 1 × 50 Ω SMA (centre pin: SMA female) |
| Technology | GPS/GLONASS/BeiDou/Galileo/QZSS |
| Positioning Accuracy | 2.5 m CEP (open air) |
| Serial Interface | |
| Interface | 1 × RS232 or 1 × RS485 (software switchable) |
| Connector | 3.5 mm terminal block |
| Terminal Resistor | 120 Ω switch (RS485) |
| Baud Rate | 300 bps to 230400 bps |
| Digital I/O | |
| Channels | 1 × DI + 1 × DO (galvanic isolation) |
| Connector | 3.5 mm terminal block |
| Digital Input | Dry contact |
| Digital Output | Wet contact, max. 0.3 A @ 30 VDC |
| Others | |
| Button | 1 × RESET |
| USB | 1 × USB 2.0 Type-C (power, network supply, debug) |
| LED Indicators | 1 × SYSTEM, 1 × SIM |
| Built-in | Watchdog, timer |
| Power Supply and Consumption | |
| Power Input | 5–24 VDC via 2-pin 3.5 mm terminal block; or 5 V / 1 A via USB Type-C |
| Consumption | Standby 6.3 mA; idle 78 mA; data 226 mA @ 12 V |
| Physical Characteristics | |
| Ingress Protection | IP30 |
| Housing & Colour | Metal, black |
| Weight | 103 g |
| Dimensions | 70 × 55 × 22 mm (antenna connector excluded) |
| Installation | Desktop, wall mounting, DIN rail mounting |
| Operating Temperature | −40 °C ~ +60 °C |
| Storage Temperature | −40 °C ~ +85 °C |
| Relative Humidity | 0 ~ 95% (non-condensing) |
| Network | |
| Protocols | IPv4/IPv6, PPP, SNMP v1/v2c/v3, TCP, UDP, DHCP, RIPv1/v2, OSPF, DDNS, VRRP, HTTP, HTTPS, DNS, MQTT, MQTTS, TR069, etc. |
| Routing | Static, priority-based, RIP, OSPF, routing filtering |
| Reliability | VRRP, WAN failover, IP passthrough |
| Security | |
| Firewall | Access control, DMZ, port mapping, MAC binding, SPI, DoS/DDoS protection |
| AAA | RADIUS, TACACS+, LDAP, local authentication |
| VPN | OpenVPN, IPsec, GRE, L2TP, PPTP, DMVPN, WireGuard, ZeroTier |
| Field interfaces | |
| Serial Modes | Transparent (TCP/UDP/MQTT), Modbus TCP/RTU client, Modbus gateway, DLMS client |
| Digital I/O | DI/DO readable and triggerable via SMS, email, CLI, Modbus, MQTT |
| Power Management | Standby mode; wake by schedule, SMS, DI, etc. |
| GNSS software | |
| Protocol | NMEA0183, PMTK |
| Output | Serial port, MQTT, TCP client/server, UDP server |
| Management | |
| Configuration | Web, CLI (SSH/Telnet), SMS, SNMP, TR069, DeviceHub, Milesight Development Platform |
| Remote Access | DeviceHub, MilesightVPN |
| Events | Startup/reboot, link up/down, wake-up alarms |
| Approvals | |
| Regulatory | CE, FCC |
| Environmental | RoHS |
No specification rows match the filter.
Compare
Same mini chassis. Cat 1 versus Cat 4 with GNSS, as in the UR41(L) datasheet.
| Specification | UR41LLTE Cat 1 mini router | UR41LTE Cat 4 mini router with GNSSViewing |
|---|---|---|
| Best for | Embedded Cat 1 sites that do not need GNSS | Compact Cat 4 sites that need GNSS and low standby |
| Network | LTE Cat 1 | LTE Cat 4 |
| GNSS | Not on this model | GPS/GLONASS/BeiDou/Galileo/QZSS |
| Consumption | Standby 6.3 mA; idle 70 mA; data 157 mA @ 12 V | Standby 6.3 mA; idle 78 mA; data 226 mA @ 12 V |
| Approvals | CE | CE, FCC |
| Same on all | 1 × RJ45 · RS232/RS485 · USB Type-C · IP30 · 70 × 55 × 22 mm · –40 … +60 °C | |
Applications
Charge points need reliable backhaul for session data, remote diagnostics and grid interaction. The UR41 fits compact controller cabinets and supports low-power standby between charging events.
DLMS protocol support enables direct integration with smart metres for substation automation, AMI roll-outs and distribution monitoring without additional protocol converters.
Sub-10 mA standby targets and wide 5–24 VDC input suit solar controllers and battery-backed sites where every milliamp counts over multi-year deployments.
RS485/Modbus gateway modes, MQTT and digital I/O connect BMS controllers, sensors and actuators in intelligent building and light industrial automation projects.
Built-in multi-constellation GNSS with cellular backhaul gives location and telemetry for mobile assets, distributed cabinets and unattended equipment in the field.
Ordering
One official order code per model. Add the exact code to the quote list.
| Order code | Model | Network | GNSS | Approvals | Actions |
|---|---|---|---|---|---|
| UR41L-L0CEUViewing | UR41L | LTE Cat 1 | Not on this model | CE | |
| UR41-L08EUViewing | UR41 | LTE Cat 4 | GPS/GLONASS/BeiDou/Galileo/QZSS | CE, FCC |
Questions
UR41 (UR41-L08EU) is LTE Cat 4 with GNSS. UR41L (UR41L-L0CEU) is LTE Cat 1 without GNSS, according to the UR41(L) datasheet.
5–24 V DC on the 2-pin 3.5 mm terminal block, or 5 V / 1 A via USB Type-C, according to the specification.
IP30, according to the specification.
–40 °C to +60 °C, according to the specification.
No. GNSS is listed for UR41 only in the datasheet.
UR41L: CE. UR41: CE and FCC, according to the datasheet.
Request a quote
Tell us the quantity and the delivery country. We reply within one working day with the price, stock at the nearest warehouse and the dispatch date.
Manufacturer warranty24 months
Europe & United Kingdom
Product advice, availability and project enquiries.
All contact details