Real-time GNSS tracking
Real-time GNSS tracking.
GV58CEU Queclink Vehicle GPS Tracker
GNSS Telematic Tracker
Order codeGV58CEU In stockOfficial distributor
The GV58CEU is a GNSS Telematic Tracker. It has GNSS u-blox All-in-one GNSS, Wireless BLE 5.2, power input 8–32 V and a size of 86.7(L) × 46.4(W) × 18.1(H) mm as listed in the specification.
- GNSSu-blox All-in-one GNSS
- WirelessBLE 5.2
- Power8–32 V
- Operating–30 … +70 °C
- Size86.7(L) × 46.4(W) × 18.1(H) mm
- In stockVilnius warehouse · EU
- In stockLondon warehouse · UK
Dispatch and lead time are confirmed in the quote.
- Official distributor
- 17+ years in IoT
- Installation support
Manufacturer warranty24 months
Overview
GV58CEU overview
Core Purpose
The GV58CEU is a compact and cost-effective GNSS tracker designed for vehicle finance, leasing, and general fleet management. It provides essential tracking, monitoring, and safety functions in a small form factor. The device is suitable for large-scale deployments where simplicity and cost efficiency are critical.
Connectivity and Communication
The device operates on LTE Cat 1 with EGPRS fallback to ensure reliable communication across Europe. This allows consistent data transmission in both urban and regional environments. OTA support enables remote configuration and maintenance.
Positioning and Tracking
An integrated u-blox all-in-one GNSS receiver provides accurate vehicle location tracking. Position data supports route history, real-time monitoring, and stolen vehicle recovery. Geo-fence alerts notify when vehicles enter or leave defined areas.
Monitoring and Safety Functions
The GV58CEU supports ignition detection, motion detection, tow alarms, and emergency alarms. Driving behavior monitoring and crash detection support accident analysis and safety programmes. Jamming detection alerts help identify signal interference attempts.
Power and Environmental Suitability
The device operates on a standard 8–32V DC vehicle power supply and includes an internal backup battery. It supports operation across a wide temperature range, suitable for different vehicle environments. Compact size allows discreet installation.
Expansion and I/O Support
The tracker supports digital inputs and outputs, a latched output, and a 1-wire interface. Driver identification is supported through 1-wire iButton or BLE accessories. Internal antennas simplify installation and reduce wiring complexity.
Key features
Ignition and motion detection
Ignition and motion detection.
Crash and driving behavior detection
Crash and driving behavior detection.
Driver identification support
Driver identification support.
Remote OTA device control
Remote OTA device control.
LTE Cat 1 with EGPRS
LTE Cat 1 with EGPRS fallback.
BLE 5.2 support
BLE 5.2 support.
86.7 × 46.4 × 18.1
86.7 × 46.4 × 18.1 mm.
Technical data
GV58CEU specifications
| General Specifications | |
|---|---|
| Dimensions | 86.7(L) × 46.4(W) × 18.1(H) mm |
| Weight | 80 g |
| Backup Battery | Li-Polymer, 190 mAh |
| Operating Voltage | 8 ~ 32V DC |
| Operating Temperature | -30℃ ~ +70℃ |
| Storage Temperature | -40℃ ~ +80℃ |
| Region | Europe |
| Certification | CE |
| Cellular Specifications | |
| Technology | LTE Cat 1 |
| Operating Band | LTE-FDD: B1/B3/B7/B8/B20/B28 |
| EGPRS | 900 / 1800 MHz |
| GNSS Specifications | |
| GNSS Type | u-blox All-in-one GNSS Receiver |
| Position Accuracy (CEP) | Autonomous: < 2 m |
| Interfaces | |
| Digital Input | 1 × positive trigger input for ignition detection; 2 × negative trigger inputs (1 configurable for analog/digital input) |
| Digital Output | 1 × digital output, open drain, 150 mA max drive current |
| Latched Digital Output | 1 × latched digital output, open drain, 150 mA max drive current (Reserved) |
| Cellular Antenna | Internal only |
| GNSS Antenna | Internal only |
| BLE Antenna | Internal only |
| LED Indicators | CEL, GNSS, Power |
| Micro USB Interface | Used for configuration, upgrade and debug (Internal) |
| 1-wire Interface | 1 (Support 1-wire temperature sensor and iButton driver ID) |
| Connector | 9-pin interface |
| BLE | |
| BLE | BLE 5.2 |
No specification rows match the filter.
Applications
GV58CEU applications
Automobile Finance
The GV58CEU supports vehicle finance programmes by providing tracking, ignition status, and recovery features. These functions help reduce risk and improve asset control.
Car Leasing
Leasing companies use the device for vehicle usage monitoring and theft recovery. Compact size allows installation without affecting vehicle aesthetics.
Fleet Management
The tracker provides location visibility, driving behavior data, and event alerts for fleet operators. OTA control simplifies large-scale fleet management.
Stolen Vehicle Recovery
GNSS tracking, tow alarms, and jamming detection support rapid response and vehicle recovery. Geo-fencing enhances theft prevention.
Logistics Operations
The device supports basic fleet tracking and monitoring for delivery and service vehicles. Motion and ignition detection help track vehicle usage patterns.
Documentation
GV58CEU downloads
Questions
GV58CEU questions and answers
Does the GV58CEU include GNSS?
u-blox All-in-one GNSS, according to the specification.
How is the GV58CEU powered?
8–32 V, according to the specification.
What is the operating temperature of the GV58CEU?
–30 … +70 °C, according to the specification.
What gnss does the GV58CEU provide?
u-blox All-in-one GNSS, according to the specification.
Request a quote
GV58CEU price and lead time
Tell us the quantity and the delivery country. We reply within one working day with the price, stock at the nearest warehouse and the dispatch date.
European headquarters+370 655 51654[email protected]
United Kingdom branch+44 7425 726932[email protected]
- Company code306755852
- VAT numberLT100017217417
- Official distributor
- 17+ years in IoT
- Installation support
Manufacturer warranty24 months
Related
