Real-time vehicle tracking
Real-time vehicle tracking.

GNSS Telematic Tracker
The GV75CG is a rechargeable, waterproof tracking device designed for motorcycles and a wide range of mobile assets. A wide 9–90V DC input supports motorcycles, electric vehicles, and heavy machinery.
Dispatch and lead time are confirmed in the quote.
Manufacturer warranty24 months
Overview
The GV75CG is a rechargeable, waterproof tracking device designed for motorcycles and a wide range of mobile assets. It provides location tracking, safety monitoring, and theft protection in a compact form factor. The device is built for long-term deployment with minimal vehicle battery impact.
The device uses LTE Cat 1 with 2G fallback to maintain connectivity across global regions. It supports multiple transmission methods including TCP, UDP, SMS, and MQTT. TLS 1.2 encryption is supported for secure data transmission.
The GV75CG uses a u-blox all-in-one GNSS receiver supporting GPS positioning with high accuracy. Fast start times allow quick location reporting after power-up or movement. Location data supports real-time tracking and historical route analysis.
The device includes crash detection and driving behavior monitoring such as harsh braking and acceleration. Tow alarms trigger when movement is detected while ignition is off. Jamming detection alerts users to signal interference attempts.
A wide 9–90V DC input supports motorcycles, electric vehicles, and heavy machinery. Zero power consumption technology prevents vehicle battery drain when ignition is off. The IP67-rated enclosure protects against water and dust in harsh environments.
The GV75CG includes multiple digital inputs and outputs, a latched output, and an RS232 port for external devices. Internal cellular, GNSS, and BLE antennas simplify installation. OTA control allows remote management of digital outputs.
Real-time vehicle tracking.
Crash and driving behavior detection.
Jamming interference detection.
Geo-fence and tow alerts.
Remote output control.
LTE Cat 1 with 2G fallback.
BLE 5.2 support.
IP67 waterproof enclosure.
Technical data
| General Specifications | |
|---|---|
| Dimensions | 95(L) × 52(W) × 18.3(H) mm |
| Weight | 141.5 g (4.99 oz) |
| Backup Battery | Li-Polymer, 3.7V, 1100 mAh |
| Operating Voltage | 9 ~ 90V DC |
| Operating Temperature | -30 °C ~ +70 °C |
| Storage Temperature | -40 °C ~ +80 °C |
| Zero Power Consumption | Typical <0.7mA @12V |
| Buffer Messages | Up to 10,000 |
| Waterproof | IP67 |
| Region | Global |
| Certification | CE, Anatel, FCC |
| LTE Specifications | |
| Operating Band | LTE Cat 1 LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28 |
| Data Transmission | LTE-FDD: Max 150Mbps (DL) / Max 50Mbps (UL) |
| GSM Specifications | |
| Frequency | 850/900/1800/1900 MHz |
| Data Transmission | EDGE: DL 236.8Kbps / UL 236.8Kbps; GPRS: DL 85.6Kbps / UL 85.6Kbps |
| GNSS Specifications | |
| GNSS Type | u-blox All-in-One GNSS receiver |
| Sensitivity | Cold start: -148 dBm; Hot start: -160 dBm; Tracking: -167 dBm |
| Position Accuracy (CEP) | Autonomous: < 2.0 m |
| TTFF (Open Sky) | Cold start: 24s average; Hot start: 1s average |
| Interfaces | |
| Digital Input | 1 × positive trigger input for ignition detection |
| Digital Output | 1 × digital output, open drain, 150 mA max |
| Configurable Digital I/O | 1 × configurable digital output/digital input |
| Latched Digital Output | 1 × latched digital output, open drain, 150 mA max |
| Serial Port | 1 × RS232 |
| Cellular Antenna | Internal only |
| GNSS Antenna | Internal only |
| BLE Antenna | Internal only |
| LED Indicators | CEL, GNSS, PWR |
| Micro USB Interface | Internal only, used for configuration and upgrade |
| Air Interface Protocol | |
| Transmission Protocol | TCP, UDP, SMS |
| Scheduled Report | Time, distance, mileage based reporting |
| Geo-fences | Up to 20 internal geo-fence regions |
| Special Alarm | Based on digital/analog inputs |
| Low Power Alarm | Backup battery low |
| Power On Report | Device power-on report |
| Tow Alarm | Tow detection in ignition-off state |
| Driving Behavior Monitoring | Harsh braking, acceleration detection |
| Crash Detection | Accident data collection |
| Remote Control | OTA control of digital outputs |
| Jamming Detection | Interference detection alert |
| MQTT | MQTT server reporting |
| TLS | TLS 1.2 supported |
No specification rows match the filter.
Applications
The device provides real-time tracking, crash alerts, and theft protection for motorcycles. Zero power consumption allows long-term parking without battery drain.
Its IP67 waterproof design makes the GV75CG suitable for watercraft tracking. GNSS positioning supports monitoring of movement and usage on water.
The tracker supports construction equipment and heavy machinery with wide voltage input and rugged protection. Tow and movement alarms help prevent unauthorised use.
Support for 9–90V DC allows use on e-bikes, scooters, and golf carts. Compact size enables discreet installation.
Documentation
Questions
–30 … +70 °C, according to the specification.
IP67, according to the specification.
Real-time vehicle tracking, according to the manufacturer description.
u-blox All-in-One GNSS receiver, according to the specification.
Request a quote
Tell us the quantity and the delivery country. We reply within one working day with the price, stock at the nearest warehouse and the dispatch date.
Manufacturer warranty24 months
Europe & United Kingdom
Product advice, availability and project enquiries.
All contact details